Skylink OScam M7 for irdeto Dynamic Camkey (Layer 2b)

[mmu]

2023/08/30 20:32:20 57C71859 r (reader) Irdeto_mod [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2023/08/30 20:32:52 57C71859 r (reader) Irdeto_mod [internal] Hist. Bytes: TÄ

30 sekund "rozoberal" ATR, resp. sa prepinal do IRD mode

Takže je to normální čas ?

Děkuji.

[marian34]

Uďo, to je napousto nenoumauni. Kukaj sem Uďo:

Kód: Vybrat vše

root@bananapim2plus:~/ird-oscam# Distribution/oscam-1.20_svn11725-arm-linux-gnueabihf -c /root/config/
18:24:47 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11725 (arm-linux-gnueabihf)
18:24:47 00000000 s     (main) System name    = Linux
18:24:47 00000000 s     (main) Host name      = bananapim2plus
18:24:47 00000000 s     (main) Release        = 5.10.9-sunxi
18:24:47 00000000 s     (main) Version        = #trunk SMP Fri Jan 22 15:16:28 CET 2021
18:24:47 00000000 s     (main) Machine        = armv7l
18:24:47 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2200
18:24:47 00000000 s   (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
18:24:47 00000000 s   (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
18:24:47 00000000 s     (main) signal handling initialized
18:24:47 00000000 s   (config) 12 provid's loaded
18:24:47 00000000 s   (config) 64 service-id's loaded in 1 ms
18:24:47 00000000 s      (net) newcamd: initialized (fd=4, port=6024)
18:24:47 00000000 s      (net) -> CAID: 0624 PROVID: 000000
18:24:47 00000000 s      (net) newcamd: initialized (fd=5, port=6053)
18:24:47 00000000 s      (net) -> CAID: 0653 PROVID: 000000
18:24:47 00000000 s      (net) newcamd: initialized (fd=6, port=6068)
18:24:47 00000000 s      (net) -> CAID: 0668 PROVID: 000000
18:24:47 00000000 s      (net) cccam: initialized (fd=7, port=12110)
18:24:47 00000000 s   (reader) tbs [mouse] creating thread for device /dev/tbs
18:24:47 00000000 s     (main) waiting for local card init
18:24:47 2CB5463F h    (webif) webif: decompressed 158088 bytes back into 384688 bytes
18:24:47 2CB5463F h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
18:24:48 6EBC751B r   (reader) tbs [mouse] Reader initialized (device=/dev/tbs, detect=none, mhz=357, cardmhz=357)
18:24:48 6EBC751B r   (reader) tbs [mouse] card detected
18:24:50 6EBC751B r   (reader) tbs [mouse] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
18:24:50 6EBC751B r   (reader) tbs [mouse] Setting baudrate to 9600 bps
18:24:51 6EBC751B r   (reader) tbs [mouse] Hist. Bytes: IRDETO ACS V6.0
18:24:51 6EBC751B r   (reader) tbs [mouse] detect irdeto card
18:24:51 6EBC751B r   (reader) tbs [mouse] Irdeto SC 60 version 1 revision 0, patch level 1
18:24:51 6EBC751B r   (reader) tbs [mouse] Owner ID : 8DAD
18:24:51 6EBC751B r   (reader) tbs [mouse] Providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
18:24:51 6EBC751B r   (reader) tbs [mouse] Caid     : 0624, acs: 0.06, country code: SVK
18:24:52 6EBC751B r   (reader) tbs [mouse] Rand4    : 1170062C
18:24:52 6EBC751B r   DynCamKey
18:24:52 6EBC751B r   IPRCiLayer supported
18:24:52 6EBC751B r   ********** CamKeyData OK  *****************
18:24:52 6EBC751B r   IPRCiLayerInit Success...
18:24:53 6EBC751B r   (reader) tbs [mouse] active providers: 4 (0xxxxx,ffffff,ffffff,ffffff)
18:24:53 6EBC751B r   (reader) tbs [mouse] found card system irdeto
18:24:53 6EBC751B r   (reader) tbs [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
18:24:53 6EBC751B r   (reader) tbs [irdeto] entitlements for provider: 1, id: 0xxxxx
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 1392, date: 2013/09/14 - 2013/10/04
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 7FFE, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 7FFD, date: 2023/08/19 - 2023/08/29
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 03E9, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: FFB0, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: FFE0, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 7FFC, date: 2023/04/08 - 2023/05/08
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: FFD8, date: 2023/04/08 - 2023/04/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 1772, date: 2023/08/27 - 2023/09/27
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 03EA, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 03EB, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 03EC, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 03ED, date: 2023/08/19 - 2023/09/18
18:24:53 6EBC751B r   (reader) tbs [irdeto] chid: 0004, date: 2023/08/28 - 2023/09/28
18:24:53 6EBC751B r   (reader) tbs [irdeto] ready for requests
18:24:54 00000000 s     (main) init for all local cards done
18:24:54 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
18:24:54 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
18:24:54 060CF07F c   (client) plain dvbapi-client granted (local, au=auto (2 reader))
18:24:54 060CF07F c   (dvbapi) dvbapi channelcache loaded from /root/config/oscam.ccache
18:24:54 060CF07F c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
18:24:54 060CF07F c   (dvbapi) Client connected: 'dvbapiNET v1.0 (#20d86480)' (protocol version = 2)
18:24:54 060CF07F c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0CA8 PROVID: 000000
18:24:54 060CF07F c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0B02 ECM_PID: 0CB0 PROVID: 000000
18:24:54 060CF07F c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 0CAF PROVID: 000000
18:24:54 060CF07F c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 181D ECM_PID: 0CAE PROVID: 000000
18:24:54 060CF07F c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0500 ECM_PID: 0CAA PROVID: 051910
18:24:54 060CF07F c   (dvbapi) Demuxer 0 found 5 ECM pids and 2 STREAM pids in CA PMT
18:24:54 060CF07F c   (dvbapi) Warning reader tbs received no emms for the last 1693844694 seconds -> skip, this reader needs emms first!

za 7s sa už hlási dvbapi klient na inicializovanú kartu.

[berrysam]

môže mi niekto poslať kompletné ÚDAJE ?

[peter54]

Nerozumiem čo by si potreboval. Niečo ti nefunguje či o čo ti ide?

[copy1530]

On řeší tohle http://www.privatkrasno.sk/kontakt/pic.html?, ale k L1 a ani k L2b to nepotřebuje, když už zná:

Kód: Vybrat vše

FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB

[marian34]

Niečo pre inšpiráciu - log z jedného ukecaného oscamu:

Kód: Vybrat vše

19:23:37 7B58EB1A c      (ecm) local (0624&/A000/3734/48:FC29D9FE1462047A4D070A5E86A1C1E8): found (117 ms) by tbs - CANAL+ Sport (SK)
19:23:47 7B58EB1A c      (ecm) local (0624&/A000/3734/48:26DE5B5FE17571C74D070A5E86A1C1E8): found (103 ms) by tbs - CANAL+ Sport (SK)
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 stopped descrambling for program 3734 (CANAL+ Sport (SK))
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 181D ECM_PID: 0DDA PROVID: 000000
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0624 ECM_PID: 0DD4 PROVID: 000000
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 0DDB PROVID: 000000
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 0DD6 PROVID: 051910
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B02 ECM_PID: 0DDC PROVID: 000000
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 found 5 ECM pids and 2 STREAM pids in CA PMT
19:23:52 7B58EB1A c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
19:23:53 5E4F135C r cw crc error (maybe protection tk or cwpk)
19:23:53 5E4F135C r Warning: unknown cw protection
19:23:53 5E4F135C r cw crc error (invalid key? or csa2...)
19:23:53 7B58EB1A c      (ecm) local (0624&/A000/3737/4B:C83FFA34CE170B2D0D4142554CF42B27): found (131 ms) by tbs - Canal+ Sport 2 TEST

[aldo]

Canal2 aj mne funguje ale iba s oscam 11523 na rpi arm. ALe s 11715 nefunguje. konfiguracia je asi spravna ked s 11523 funguje ale s 11715 nie. Kde moze byt zadrhel?

Kód: Vybrat vše

[reader]
label = skylink
protocol = mouse
device = /dev/ttyUSB0
caid = 0624
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
force_irdeto = 1
needsemmfirst = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
disablecrccws = 1

hmm? Dik za nakopnutie

[slax78]

Aký to je TK key ? Parovaci ktorý na konci ešte prepočítava výsledné CW ?

[copy1530]

marian34 Inspirace pro Skylink nebo pro nás tady na fóru?

[copy1530]

aldo Kterou verzi 11715 máš přesně na mysli?

[aldo]

tuto verziu som si stiahol : Oscam-11715-mxp-ARM-MIPSEL-dcamkey.zip

[marian34]

Aký to je TK key ? Parovaci ktorý na konci ešte prepočítava výsledné CW ?

Tweak keys je zabezpečenie staré ako irdeto same. Možno by si niekde našiel predpotopný oscam, ktorý to mal poriešené, ale používať by si ho asi nechcel.

[slax78]

Aha , tak tweak kľúče viem čo sú , len to TK skratku som asi zle pochopil vo výpise .
Ešte na teba otázka , vidím že sa problematike rozumieš :
Aky údaj (hodnota ) v ECM hovorí , že je použité párovanie na danom programe ?

[Sidney]

Zdravim vsechny a poprosil bych Vas o nasmerovani. Mam domaci sdileni skylink karty, kartu vlozenou ve vu zero, klienti dm500hd a chtel bych si zprovoznit nefunkcni kanaly. Muj dotaz, ktera verze oscam podporuje klienta? A musi byt u klienta nainstalovany private oscam nebo staci klasicky z feedu. Predem dekuji

[peter54]

U klienta môže byť oscam z feedu. U servera roky používam 11704, doporučím aj 11715. Všetky verzie v našej sekcii download pre l2b fungujú dobre a podporujú zdieľanie.

[mikrovlna]

zdravim, existuje niekde na stiahnutie verzia l2b 0642 s podporou citacky pcsc?

[sucharda]

dpbry den
mam lunix 4k nainstalovany oscam l2b pri prepinani kanalu u nekterych
pri prepnuti na iny kanal asi na sekundu naskoci novy kanal potom tma cca2sec
a znovu ide je to prkotina asi mam neco spatne nastavene nevite nekdo co stym

[Olda]

zdar podívej se do logu oscam co se děje když přepneš program. Pokud je to ru šarík tak to může trvat i 8s

[mirodvd]

Ja na boxe mam Private Openpli 7.1 aj funguje na 1000 %

[siletblok]

dpbry den
mam lunix 4k nainstalovany oscam l2b pri prepinani kanalu u nekterych
pri prepnuti na iny kanal asi na sekundu naskoci novy kanal potom tma cca2sec
a znovu ide je to prkotina asi mam neco spatne nastavene nevite nekdo co stym

A mas vlastnu kartu alebo platis share ?