Freesat Oscam L2 0653

[Olda]

Těch co jim to jede bude hodně ale těch kolik dokáže aktivovat novou kartu v oscam zas tak moc není je to o zápisech a každá karta se chová jinak .

Taky jsem to řešil stav se někde v Omko nebo jiný specializovaný obchod TVsat a požádej je o aktivaci karty - po aktivaci ti to na 99% v oscam pojede .

[szoteka]

No zeptam se blbě. Na chatě mam cryptobox 650 hd. Myslite ze tot am.rpzjedu? Vzal bych to sebou

[rokson]

Ked nahras do neho spravny soft tak to pojde.

[peter54]

Vlákno má v názve oscam. Tak oscam v cryptosrande asi ťažko.

[rokson]

Ano spravne vlakno je oscam ,len pre neho bude asi najednoduchsie riesenie to AB-cko nahra spravny soft vlozi kartu freesat a pozera. A bude klud .

[szoteka]

Zase zakysla odpověď.

Ja mam oscam.octagon. tady napsali, ať to rozjedu v jinem a je. Tak jsem se zeptal. Mam na chatě i cryptobox 650HD. Rozjedu to tam? Jestli jo, vezmu kartu vecer na chatu a dam ji tam. Nic spatneho jsem zase se neptal. Jen reakce na odpověď.

Pak jestlinto pujde ji dm.zase zpět do octagonu a ten si dam pak na chatu jak pojede

[szoteka]

Kód: Vybrat vše

2023/06/30 16:05:04 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11715 (arm-linux-gnueabihf)
2023/06/30 16:05:04 00000000 s debug_level=74
2023/06/30 16:05:04 00000000 s     (main) System name    = Linux
2023/06/30 16:05:04 00000000 s     (main) Host name      = sf8008
2023/06/30 16:05:04 00000000 s     (main) Release        = 4.4.35
2023/06/30 16:05:04 00000000 s     (main) Version        = #1 SMP Mon Dec 24 06:39:12 UTC 2018
2023/06/30 16:05:04 00000000 s     (main) Machine        = armv7l
2023/06/30 16:05:04 00000000 s     (main) Stb model      = dm8000
2023/06/30 16:05:04 00000000 s     (main) Stb boxtype    = sf8008
2023/06/30 16:05:04 00000000 s     (main) creating pidfile /var/tmp/oscam-uni.pid with pid 2241
2023/06/30 16:05:04 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2023/06/30 16:05:04 00000000 s     (main) signal handling initialized
2023/06/30 16:05:04 00000000 s   (config) 1 provid's loaded
2023/06/30 16:05:04 00000000 s   (config) 1 service-id's loaded in 0 ms
2023/06/30 16:05:04 00000000 s      (net) cccam: initialized (fd=5, port=12000)
2023/06/30 16:05:04 00000000 s   (reader) TEST1 [internal] creating thread for device /dev/sci0
2023/06/30 16:05:04 00000000 s     (main) waiting for local card init
2023/06/30 16:05:04 55F053A0 h    (webif) webif: decompressed 159545 bytes back into 386200 bytes
2023/06/30 16:05:04 55F053A0 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2023/06/30 16:05:04 077CA5A5 r   (reader) TEST1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=357)
2023/06/30 16:05:04 077CA5A5 r   (reader) TEST1 [internal] Reader sci internal, detected box type: sf8008
2023/06/30 16:05:05 077CA5A5 r   (reader) TEST1 [internal] card detected
2023/06/30 16:05:05 077CA5A5 r   (reader) TEST1 [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2023/06/30 16:05:07 077CA5A5 r   (reader) TEST1 [internal] Hist. Bytes: TÄ
2023/06/30 16:05:07 077CA5A5 r   (reader) TEST1 [internal] detect irdeto card
2023/06/30 16:05:07 077CA5A5 r   (reader) TEST1 [internal] Warning: needed try nr 2, next ECM has some delay
2023/06/30 16:05:09 077CA5A5 r        (-) -- Skipped 1 duplicated log lines --
2023/06/30 16:05:09 077CA5A5 r   (reader) TEST1 [internal] card detected
2023/06/30 16:05:09 077CA5A5 r   (reader) TEST1 [internal] type: CryptoWorks
2023/06/30 16:05:09 077CA5A5 r   (reader) TEST1 [internal] Warning: needed try nr 2, next ECM has some delay
2023/06/30 16:05:32 077CA5A5 r   (reader) TEST1 [internal] card system not supported
2023/06/30 16:05:32 077CA5A5 r   (reader) TEST1 [internal] Normal mode failed, reverting to Deprecated Mode
2023/06/30 16:05:33 077CA5A5 r   (reader) TEST1 [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2023/06/30 16:05:34 077CA5A5 r   (reader) TEST1 [internal] Hist. Bytes: TÄ
2023/06/30 16:05:34 077CA5A5 r   (reader) TEST1 [internal] detect irdeto card
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] Irdeto SC 58 version 21 revision 1, patch level e
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] caid: 0653, acs: 0.05, country code: CZE
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] OwnerID: 01 A8 
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] Rand.4b: 47 68 E0 C2 
2023/06/30 16:05:35 077CA5A5 r   (reader) TEST1 [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2023/06/30 16:05:36 077CA5A5 r   (reader) TEST1 [internal] active providers: 4 (ba4cff,ffffff,ffffff,ffffff)
2023/06/30 16:05:36 077CA5A5 r   (reader) TEST1 [internal] found card system irdeto
2023/06/30 16:05:36 077CA5A5 r   (reader) TEST1 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2023/06/30 16:05:36 077CA5A5 r   (reader) TEST1 [irdeto] ready for requests
2023/06/30 16:05:37 00000000 s     (main) init for all local cards done
2023/06/30 16:05:37 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/06/30 16:05:37 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/06/30 16:05:37 00000000 s     (gbox) local gbox failed init
2023/06/30 16:05:37 1EE904B5 c   (client) plain dvbapi-client granted (LOCAL, au=auto (3 reader))
2023/06/30 16:05:37 1EE904B5 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-uni/oscam.ccache
2023/06/30 16:05:37 1EE904B5 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/06/30 16:05:37 1EE904B5 c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0653 ECM_PID: 047B PROVID: 000000 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B02 ECM_PID: 047C PROVID: 000000 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 181D ECM_PID: 047D PROVID: 000000 
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 found 6 ECM pids and 8 STREAM pids in CA PMT
2023/06/30 16:05:55 1EE904B5 c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 16:05:55 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B59/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (136 ms) by TEST1 - CT 1 HD (TEST1 do_cmd [19] 9e 00)
2023/06/30 16:05:55 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by TEST1 - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 16:05:55 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (136 ms) by TEST1 - CT 1 HD (TEST1 do_cmd [19] 9e 00)
2023/06/30 16:05:56 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1F42/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by TEST1 - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 16:05:56 1EE904B5 c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 5 disabled ecmpids!
2023/06/30 16:05:56 1EE904B5 c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 16:05:57 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B59/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (134 ms) by TEST1 - CT 1 HD (TEST1 do_cmd [19] 9e 00)
2023/06/30 16:05:57 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by TEST1 - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 16:05:57 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (138 ms) by TEST1 - CT 1 HD (TEST1 do_cmd [19] 9e 00)
2023/06/30 16:05:58 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1F42/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (0 ms) by TEST1 - CT 1 HD
2023/06/30 16:05:58 1EE904B5 c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 5 disabled ecmpids!
2023/06/30 16:05:58 1EE904B5 c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 16:05:58 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B59/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by TEST1 - CT 1 HD
2023/06/30 16:05:58 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by TEST1 - CT 1 HD
2023/06/30 16:05:59 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (0 ms) by TEST1 - CT 1 HD
2023/06/30 16:05:59 1EE904B5 c      (ecm) LOCAL (0653&/1F41/047B/1F42/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by TEST1 - CT 1 HD
2023/06/30 16:05:59 1EE904B5 c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 5 disabled ecmpids!

[marian34]

Motáte sa tu v začarovanom kruhu. Karta je aktívna, pretože je na nej aktívny("nenulový") provider - 00ba4cff. Je pravda, že verejný oscam panenské karty aktivovať nevie, ale takisto platí, že takéto(panenské) karty sa už prakticky nevyskytujú. Ak vám aj freesat pošle quazi "novú" kartu, tak je s najväčšou pravdepodobnosťou už aktivovaná, teda v minulosti používaná. Takže v tomto problém nie je.
Problém môže byť v oprávneniach(zápisoch). Verejný oscam(dokonca aj niektoré certif. zar.) nevie správne, lepšie povedané kompletne, vylistovať zápisy. Koho to zaujíma, takto to mám ja a freesat(po migrácií) zápisy vidím komplet:

Kód: Vybrat vše

static int32_t irdeto_card_info(struct s_reader *reader)
{
	def_resp;
	int32_t i, p;
	struct irdeto_data *csystem_data = reader->csystem_data;

	cs_clear_entitlement(reader); // reset the entitlements

  uint8_t sc_GetCountryCode2[] = { 0x02, 0x0B, 0x00, 0x00, 0x00 };
	uint8_t sc_GetChanelIds[]    = { 0x02, 0x04, 0x00, 0x00, 0x01, 0x00 };
	uint8_t sc_Acs57Code[]       = { 0xD2, 0x16, 0x00, 0x00, 0x01 , 0x37 };
	uint8_t sc_Acs57Prid[]       = { 0xD2, 0x08, 0x00, 0x00, 0x02, 0x00, 0x00 };
	uint8_t sc_Acs57_Cmd[]       = { ACS57GET, 0xFE, 0x00, 0x00, 0x00 };

	int32_t acspadd = 0;
	if(csystem_data->acs57 == 1)
	{
		acspadd = 8;
		reader_chk_cmd(sc_Acs57Code, 0);
		int32_t acslength = cta_res[cta_lr - 1];
		sc_Acs57_Cmd[4] = acslength;
		reader_chk_cmd(sc_Acs57_Cmd, acslength + 2);
	}
	else
	{
		reader_chk_cmd(sc_GetCountryCode2, 0);
	}
 
	if(((cta_lr > 9) && !(cta_res[cta_lr - 2] | cta_res[cta_lr - 1])) || (csystem_data->acs57 == 1))
	{
		rdr_log_dbg(reader, D_READER, "max chids: %d, %d, %d, %d",
				cta_res[6 + acspadd], cta_res[7 + acspadd], cta_res[8 + acspadd], cta_res[9 + acspadd]);

		for(i = p = 0; i < reader->nprov; i++)
		{
			int32_t j, k, chid, first = 1;
			char t[32];

			if(reader->prid[i][1] != 0xff)     //[1]..necita ost. providerov...[4]-original
			{
				p++;
				sc_Acs57Prid[3] = i;
				sc_GetChanelIds[3] = i; // provider at index i
				j = 0;

				 for (j=0; j<3; j++)   //stranky providera(na nase karty stacia 3), inak while
         
        // for (j=0; j<10; j++)=> why 10 .. do we know for sure the there are only 10 chids !!!
				// shouldn't it me the max chid value we read above ?!

	 //	 while(1) // will exit if cta_lr < 61 .. which is the correct break condition.
				{
					if(csystem_data->acs57 == 1)
					{
						int32_t crc = 63;
						sc_Acs57Prid[5] = j;
						crc ^= 0x01;
						crc ^= 0x02;
						crc ^= 0x04;
						crc ^= sc_Acs57Prid[2];
						crc ^= sc_Acs57Prid[3];
						crc ^= (sc_Acs57Prid[4] - 1);
						crc ^= sc_Acs57Prid[5];
						sc_Acs57Prid[6] = crc;
						irdeto_do_cmd(reader, sc_Acs57Prid, 0x903C, cta_res, &cta_lr);
						int32_t acslength = cta_res[cta_lr - 1];

						if(acslength == 0x09)        //posledna instancia, inak nekonecny cyklus while
						{
							break;
						}

						sc_Acs57_Cmd[4] = acslength;
						reader_chk_cmd(sc_Acs57_Cmd, acslength + 2);

			/*			if(cta_res[10] == 0xFF)     //zbytocne, potom break po prvom FF
						{
							break;
						}                 */

						cta_res[cta_lr - 3] = 0xff;
						cta_res[cta_lr - 2] = 0xff;
						cta_res[cta_lr - 1] = 0xff;
						acspadd = 8;
					}
					else
					{
						sc_GetChanelIds[5] = j; // chid at index j for provider at index i
						reader_chk_cmd(sc_GetChanelIds, 0);
					}

					// if (cta_lr<61) break; // why 61 (0 to 60 in steps of 6 .. is it 10*6 from the 10 in the for loop ?
					// what happen if the card only send back.. 9 chids (or less)... we don't see them
					// so we should check whether or not we have at least 6 bytes (1 chid).
					if(cta_lr < 6)
					{
						break;
					}

					for(k = 0 + acspadd; k < cta_lr; k += 6)
					{
						chid = b2i(2, cta_res + k);
						if(chid && chid != 0xFFFF)
						{
							time_t date, start_t, end_t;

							start_t = chid_date(reader, date = b2i(2, cta_res + k + 2), t, 16);
							end_t = chid_date(reader, date + cta_res[k + 4], t + 16, 16);

							// todo: add entitlements to list but produces a warning related to date variable
							cs_add_entitlement(reader, reader->caid, b2i(3, &reader->prid[i][1]), chid, 0, start_t, end_t, 3, 1);

							if(first)
							{
								rdr_log(reader, "entitlements for provider: %d, id: %06X", p, b2i(3, &reader->prid[i][1]));
								first = 0;
							}
							rdr_log(reader, "chid: %04X, date: %s - %s", chid, t, t + 16);
						}
					}
				//	j++;        //to tu snad vobec nemusi byt
				}
			}
		}
	}     
	rdr_log(reader, "ready for requests");
	return OK;
}

V každom prípade zápisy na karte byť musia, inak vyhadzuje "unsubscribed channel or chid missing" - 90 00. Ak tam nie sú, potom je potrebné v koordinácií s providerom skúmať prečo tam nie sú.
Ak tam validné zápisy sú a karta nedékoduje, je treba sa riadiť statusmi karty - odpoveď na ecm.

[Olda]

2023/06/30 16:05:57 1EE904B5 c (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by TEST1 - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 16:05:57 1EE904B5 c (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (138 ms) by TEST1 - CT 1 HD (TEST1 do_cmd [19] 9e 00)

[marian34]

Tak neviem ktorý chid na českých kartách dekóduje ct1 z 23,5, ale 1B5A tam nemá a na 1B5B odpovedá 9e 00 - chipset pairing enabled.

[EnoSat]

9e ma 2 stavy, ze ?

[palces]

Ahojte.

Skusil som nastavit freesat, podla navodou tu.
Nove zapisy presli, ale program nedekoduje.
Karta je freesat prenesena na 23,5E
Chyba pri dekodovani: FREESAT do_cmd [27] 9e 00, FREESAT uns or chid missing

Neviete prosim nakopnut v com je chyba a ktorym smerom sa vydat?

Dakujem.

[VTronik]

A jaký oscam jsi použil?

[palces]

Verzia 11704 z fora. Skusal som aj oscam_freesat, ale ten sa nerozbehne v satelite. Napise ze unespected “(“ pri spusteni

[EnoSat]

"(" - nie je urceny pre danu platformu

[palces]

Podla popisu to ma byt pre MIPS a satelit je s MIPS procesorom...
Preto sa to skusam rozbehnut na 11 704 v2

[EnoSat]

pokial neni pakovany nejakym kompresnym pakovacom mal bi si vidiet:
v klasickom listery - /lib/ld.so.1

capture_001_02072023_120648.png

v nejakom ELF listery - mips R3000

capture_002_02072023_120654.png

[rokson]

Podla popisu to ma byt pre MIPS a satelit je s MIPS procesorom...
Preto sa to skusam rozbehnut na 11 704 v2

Skus vyskusat verziu 11715

[Olda]

Ověř procesor v boxu bin je určena svn11704-mipsel-unknown-linux-gnu_v2_patch


Port MIPS jsou ve skutečnosti dva porty, debian-mips a debian-mipsel.

zkus tento jen na vyzkoušení zda ti pojede není l2 -

MIPS.zip

[Maverick]

palces škoda že neuvedeš do jakého přístroje to nahráváš , pak je to loterie takové rady .