Skylink OScam M7 for irdeto Dynamic Camkey (Layer 2b)

[Olda]

Ahoj martínek to není oscam 11704 , ale zde přidaná bin 11718-798 , ta vubec ani nemá možnost zaškrtnout dynamic_camkey = 1.

[betmen]

zdravim pani.
idem Vas poziadat o radu s oscamom, lebo uz som v koncoch.
mam postaveny server na intel procaku, na tom bezi Lubuntu 20.04, satelitny tuner od TBS v PCI slote, citacku usb smargolis v2, oscam 11704 + tvheadend na stream do LAN v dome a skylink cz kartu.
vsetko fachalo na 100% niekolko rokov az pokial nebolo potrebne prekopat oscam na l2b verziu, tu som pouzil odtialto z fora tiez r11704 pre linux.
momentalne som v stadiu, ze programy, ktore nevyzaduju l2b funguju normalne, zapisy chodia, oscam dekoduje a TV funguje bez zavahania.
problem nastane, ak prepnem na kanal, co vyzaduje l2b (napr Prima Krimi) v pohode to facha, zapisy stale chodia ECM je najdene (cca 250ms), ale po zhruba 5min to cele spadne do timeoutu a kusne sa cela citacka.
nepomoze ani restart oscamu, je potrebny restart celeho servera.
uz naozaj netusim ake nastavenie upravit, zmenit aby to opat fungovalo normálne, takze pokial mate niekto daky navrh, alebo napad, tak budem velmi vdacny...

oscam server a jeho konfig

Kód: Vybrat vše

OSCAM 1.20_svn SVN r11704
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label                         = Sky_irdeto
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
regkey                        = 7F...09
force_irdeto                  = 1
dynamic_camkey                = 1
needsemmfirst                 = 1
ecmtimeoutlimit               = 1
detect                        = cd
mhz                           = 600
group                         = 1
emmcache                      = 0,2,15,0
blockemm-bylen                = 1-36,38-59,63-150  

[Olda]

Ahoj, použij standardní čtečku do usb Phoenix a pojede to ok

[betmen]

phoenix prave nemam, navyse smargo mi v rezime mouse funguje bez problemov cca 10 rokov, takze neviem ci hladat problem v citacke.
jedine ak by binarka s l2b bola optimalizovana na phoenix a na ine nie...

[betmen]

konecne sa mi dnes prejavila chyba...

Kód: Vybrat vše

 2023/08/04 20:15:30 32EB1D16 c   (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 4 disabled ecmpids!
2023/08/04 20:15:30 32EB1D16 c   (dvbapi) Demuxer 0 impossible to descramble PID 3 CAID 0624 PROVID 000000 ECMPID 1798 PMTPID 1770 (NO MATCHING READER)
20 

po restarte oscamu

Kód: Vybrat vše

 Status Live Log Config Readers Users Services Files Failban Scripts Restart
2023/08/04 20:17:56 00000000 s     (main) System name    = Linux
2023/08/04 20:17:56 00000000 s     (main) Host name      = jarvis-htpc
2023/08/04 20:17:56 00000000 s     (main) Release        = 5.13.0-27-generic
2023/08/04 20:17:56 00000000 s     (main) Version        = #29~20.04.1-Ubuntu SMP Fri Jan 14 00:32:30 UTC 2022
2023/08/04 20:17:56 00000000 s     (main) Machine        = x86_64
2023/08/04 20:17:56 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 166245
2023/08/04 20:17:56 00000000 s couldn't open statistics file: /var/log/oscam/oscamuser.log
2023/08/04 20:17:56 00000000 s   (config) userdb reloaded: 3 accounts loaded, 0 expired, 2 disabled
2023/08/04 20:17:56 00000000 s     (main) signal handling initialized
2023/08/04 20:17:56 00000000 s   (config) 9 provid's loaded
2023/08/04 20:17:56 00000000 s   (config) 85 service-id's loaded in 0 ms
2023/08/04 20:17:56 00000000 s      (net) monitor: initialized (fd=4, port=988, ip=192.168.1.100)
2023/08/04 20:17:56 00000000 s      (net) newcamd: initialized (fd=5, port=10000, ip=192.168.1.100)
2023/08/04 20:17:56 00000000 s      (net) -> CAID: 0624 PROVID: 000000
2023/08/04 20:17:56 00000000 s   (reader) Sky_irdeto [mouse] creating thread for device /dev/ttyUSB0
2023/08/04 20:17:56 00000000 s     (main) waiting for local card init
2023/08/04 20:17:56 373E22E7 h    (webif) webif: decompressed 164363 bytes back into 402232 bytes
2023/08/04 20:17:56 373E22E7 h    (webif) HTTP Server running. ip=192.168.1.100 port=8888
2023/08/04 20:17:56 12E6A554 r   (reader) Sky_irdeto [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2023/08/04 20:17:57 12E6A554 r   (reader) Sky_irdeto [mouse] card detected
2023/08/04 20:18:00 12E6A554 r   (reader) Sky_irdeto [mouse] Error activating card.
2023/08/04 20:18:09 12E6A554 r        (-) -- Skipped 2 duplicated log lines --
2023/08/04 20:18:09 12E6A554 r   (reader) Sky_irdeto [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2023/08/04 20:18:09 12E6A554 r   (reader) Sky_irdeto [mouse] card initializing error
2023/08/04 20:18:10 00000000 s     (main) init for all local cards done
2023/08/04 20:18:10 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/08/04 20:18:10 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/08/04 20:18:10 00000000 s     (gbox) local gbox failed init
2023/08/04 20:18:10 095D3387 c   (client) plain dvbapi-client granted (dvbapi, au=on (1 reader))
2023/08/04 20:18:10 095D3387 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2023/08/04 20:18:10 095D3387 c   (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2023/08/04 20:18:11 095D3387 c   (dvbapi) Client connected: 'Tvheadend 4.2.8-36~g5bdcfd8ac' (protocol version = 2)
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 179A PROVID: 051910 
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 181D ECM_PID: 179E PROVID: 000000 
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 179F PROVID: 000000 
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0624 ECM_PID: 1798 PROVID: 000000 
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B02 ECM_PID: 17A0 PROVID: 000000 
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 found 5 ECM pids and 1 STREAM pids in CA PMT
2023/08/04 20:18:11 095D3387 c   (dvbapi) Warning reader Sky_irdeto received no emms for the last 1691173091 seconds -> skip, this reader needs emms first!
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 impossible to descramble PID 3 CAID 0624 PROVID 000000 ECMPID 1798 PMTPID 1770 (NO MATCHING READER)
2023/08/04 20:18:11 095D3387 c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids! 

[Olda]

Řešil jsem ten samej problém po určité době začal narůstat čas pak vytuhne 5 let na oscamu starší verze ok nové verze tuhne .

[betmen]

a phoenix ti to vyriešil? lebo ja mam 11704 odkedy som to spojazdnil, fakt netusim presne kolko rokov, ale 10r to isto je a doteraz bez zavahania. az s l2b binarkou je patalia.
ked vratim origo svn binarku, tak opat funguje ako ma, okrem programov co su vo vyssom zabezpeceni.
vlastne aj s touto l2b funguju bezne programy v pohode, kludne aj 24hod maraton zvladnu...

[Olda]

Ahoj, jo mě to problém vyřešilo, zajímavé bylo že verze smarreader v1 tak nějak jela ale verze v2 tuhla.

[betmen]

Oldo, prosim ta, toto je presne ten phoenix s ktorym to funguje?

https://abcom.tv/product/satelity-a-ipt ... x-1086579

dukes za info.

[Olda]

Ahoj jj muže bejt, Phoenix USB Crystal - Programátor TBS 3102 a nebo rogramator PHOENIX USB v10.0.2 7in1 +5MHz viewtopic.php?t=44

[betmen]

super, dik za pomoc.
objednal som ten z abcom. verim, ze to bude bez problemov fungovat.

[Olda]

Ahoj , jak jsi dopad vše jede jak má?

[mmu]

Ahojte,
chtěl bych tě požádat o pomoc s rozjetít Oscamu L2b na příjímaci Protek 9911 LX, image open ATV, přepsal jsem binárku novou staženou zde na fóru a bohužel L2b programy nejdou ...
zde log:

Kód: Vybrat vše

2023/08/27 13:02:42 4FB176FF c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/08/27 13:02:42 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=48 (hex: 0x30), cnt=1: written (129 ms)
2023/08/27 13:02:45 7C86B60C r        (-) -- Skipped 1 duplicated log lines --
2023/08/27 13:02:45 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (198 ms)
2023/08/27 13:02:45 4FB176FF c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/08/27 13:02:47 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (200 ms)
2023/08/27 13:02:47 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (199 ms)
2023/08/27 13:02:48 4FB176FF c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/08/27 13:02:48 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (197 ms)
2023/08/27 13:02:51 7C86B60C r        (-) -- Skipped 2 duplicated log lines --
2023/08/27 13:02:51 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (198 ms)
2023/08/27 13:02:52 4FB176FF c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/08/27 13:02:52 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (198 ms)
2023/08/27 13:02:52 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (197 ms)
2023/08/27 13:02:53 7C86B60C r   (reader) ICE_karta [cryptoworks] dreamosat emmtype=global, len=72 (hex: 0x48), cnt=1: written (198 ms)

Moc děkuji.
MM

[VTronik]

Musíš také opravit konfiguraci oscamu tak, aby karta jela v režimu irdeto a ne cryptoworks. Je to tu již mnohokráte popsáno. Stačí hledat.

[mmu]

Musíš také opravit konfiguraci oscamu tak, aby karta jela v režimu irdeto a ne cryptoworks. Je to tu již mnohokráte popsáno. Stačí hledat.

Kartu jsem přepnul do Irdeto módu, ale stále chybka Děkuji.

Kód: Vybrat vše

2023/08/27 14:29:19 7AE0B53D r   (reader) Irdeto_mod [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2023/08/27 14:29:51 7AE0B53D r   (reader) Irdeto_mod [internal] Hist. Bytes: TÄ
2023/08/27 14:29:51 7AE0B53D r   (reader) Irdeto_mod [internal] WARNING: ACS57 card can require the CamKey from config
2023/08/27 14:29:51 7AE0B53D r   (reader) Irdeto_mod [internal] Irdeto SC 60 version 1 revision 0, patch level 1
2023/08/27 14:29:51 7AE0B53D r   (reader) Irdeto_mod [internal] caid: 0624, acs: 0.06, country code: CZE
2023/08/27 14:29:51 7AE0B53D r   (reader) Irdeto_mod [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2023/08/27 14:29:52 7AE0B53D r   (reader) Irdeto_mod [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [internal] active providers: 4 (90d0ff,ffffff,ffffff,ffffff)
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [internal] found card system irdeto
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] entitlements for provider: 1, id: 90D0FF
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 138E, date: 2012/08/28 - 2012/09/16
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 138F, date: 2012/08/28 - 2012/09/16
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 03EA, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 7FFD, date: 2023/08/27 - 2023/09/06
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 7FFC, date: 2023/08/19 - 2023/09/18
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 1771, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 03E9, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 03EC, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 03EB, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 03ED, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: 7FFE, date: 2023/08/27 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: FFD8, date: 2023/08/27 - 2023/09/06
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: FFB0, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] chid: FFE0, date: 2023/08/26 - 2023/09/26
2023/08/27 14:29:53 7AE0B53D r   (reader) Irdeto_mod [irdeto] ready for requests
2023/08/27 14:29:54 00000000 s     (main) init for all local cards done
2023/08/27 14:29:54 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/08/27 14:29:54 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/08/27 14:29:54 4A118C59 c   (client) plain dvbapi-client granted (dreamosat, au=auto (1 reader))
2023/08/27 14:29:54 4A118C59 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2023/08/27 14:29:54 4A118C59 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/08/27 14:29:54 4A118C59 c   (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Inappropriate ioctl for device

[bretah]

Ahojte, jde Vám, prosím, pod verzí 11704 Canal+Sport 2 Test?

Kód: Vybrat vše

2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 181D ECM_PID: 0DDA PROVID: 000000 
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0624 ECM_PID: 0DD4 PROVID: 000000 
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0653 ECM_PID: 0DDB PROVID: 000000 
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 0DD6 PROVID: 051910 
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B02 ECM_PID: 0DDC PROVID: 000000 
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 found 5 ECM pids and 2 STREAM pids in CA PMT
2023/08/27 20:39:40 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:40 29591530 r cw crc error (invalid key?)
2023/08/27 20:39:40 577F4E2D c      (ecm) dedousek (0624@000000/A000/3737/4B:FCF55CFD9181A669EB967E31574DDFB3): not found (198 ms) by skylink
2023/08/27 20:39:41 577F4E2D c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2023/08/27 20:39:41 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:41 577F4E2D c      (ecm) dedousek (0624@000000/A000/3737/4B:FCF55CFD9181A669EB967E31574DDFB3): not found (1 ms) by skylink
2023/08/27 20:39:41 577F4E2D c   (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 4 disabled ecmpids!
2023/08/27 20:39:41 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:42 577F4E2D c      (ecm) dedousek (0624@000000/A000/3737/4B:FCF55CFD9181A669EB967E31574DDFB3): not found (0 ms) by skylink
2023/08/27 20:39:42 577F4E2D c   (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 4 disabled ecmpids!
2023/08/27 20:39:42 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:42 577F4E2D c      (ecm) dedousek (0624@000000/A000/3737/4B:FCF55CFD9181A669EB967E31574DDFB3): not found (1 ms) by skylink
2023/08/27 20:39:42 577F4E2D c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2023/08/27 20:39:42 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:42 29591530 r   (reader) skylink [irdeto] dedousek emmtype=global, len=54 (hex: 0x36), cnt=0: written (126 ms)
2023/08/27 20:39:43 577F4E2D c      (ecm) dedousek (0624@000000/A000/3737/4B:FCF55CFD9181A669EB967E31574DDFB3): not found (1 ms) by skylink
2023/08/27 20:39:43 577F4E2D c   (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 4 disabled ecmpids!
2023/08/27 20:39:43 577F4E2D c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0DD4 ANY CHID PMTPID 0DAC VPID 0DB6
2023/08/27 20:39:43 29591530 r cw crc error (invalid key?)

Díky.

[copy1530]

Ano, jde. Nastav na klientovi disablecrccws= 1.

[bretah]

Tak to bohužel nepomohlo, ani update na 11715 verzi.

[marian34]

Použi oscam_11523 z downloadu(+disablecrccws= 1), tam je to ošetrené. Ostatné bin majú s csa2 nateraz problém.

[bretah]

S 11523 funkční, děkuji moc!