Skylink OScam M7 for irdeto Dynamic Camkey (Layer 2b)

[sky59]

To bola moja reakcia na gigi25 ktory-a vytiahol A000

[Olda]

Kód: Vybrat vše

2024/04/28 20:29:04 2991C97D c      (ecm) test (0624@000000/DC83/3C29/8F:A4FB99AAD90B99CEBCEE17F8C7CE3144): not found (164 ms) by backup (F/3/3/3) - Arena Sport 1
2024/04/28 20:29:07 2991C97D c      (ecm) test (0624@000000/A000/36EC/59:72ADD726EC5111B248C25C61FE18896A): found (96 ms) by cz (L/2/3/3) - Prima Krimi
2024/04/28 20:29:07 2991C97D c      (ecm) test (0624@000000/0000/36E5/59:06B182D799A918B6B09134A426F281AB): found (121 ms) by cz (L/2/3/3) - Prima Max

Ahoj , jak píše sky59 je to skylink karta lokální a přestala dávat ecm

taky očekávám požadavek 0000 nebo A000 , vše zaplaceno je v balíku mini

[EnoSat]

ECM posiela klient na kartu, karta dava CW
a kedze ti tam hadze nezmyselne ChID musis si skontrolovat co vlastne na kartu posiela

Kód: Vybrat vše

2024/04/28 21:02:53 0D741FD1 c   (dvbapi) Demuxer 0 ECMTYPE 80 CAID 0624 PROVID 000000 ECMPID 0493 IRDETO INDEX 00 MAX INDEX 00 CHID 0000 CYCLE FE VPID 044D
2024/04/28 21:02:53 0D741FD1 c   (dvbapi) Demuxer 0 Filter 1 set ecmtable to ODD (CAID 0624 PROVID 000000 FD 12)
2024/04/28 21:02:53 0D741FD1 c   (dvbapi) Demuxer 0 Filter 1 set irdetoindex to 0 on fd 12
2024/04/28 21:02:53 0D741FD1 c      (ecm) get cw for ecm:
2024/04/28 21:02:53 0D741FD1 c      (ecm)   80 70 56 41 00 00 00 00 80 06 01 4D 90 95 60 24 
2024/04/28 21:02:53 0D741FD1 c      (ecm)   08 42 89 25 B0 DE D9 1F 9B 3B 40 2D FB 97 85 52 
2024/04/28 21:02:53 0D741FD1 c      (ecm)   C9 4A CB 6C B9 25 A2 08 38 E0 C4 9B C3 65 38 25 
2024/04/28 21:02:53 0D741FD1 c      (ecm)   C1 E1 0F 60 7A 00 E0 F8 FF DA FF 39 83 FD A6 3F 
2024/04/28 21:02:53 0D741FD1 c      (ecm)   A2 68 94 12 BA 38 73 C1 BD 5A 60 9A A3 D3 A4 F4 
2024/04/28 21:02:53 0D741FD1 c      (ecm)   19 76 7E D2 5F 8C F9 40 4B 
2024/04/28 21:02:53 0D741FD1 c   (dvbapi) Demuxer 0 request controlword for ecm 0624&/3C29/0493/0000/59_00000000000000000000000000000000 HOP:00:0000_0000
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 control word received for PID 0 CAID 0624 PROVID 000000 ECMPID 0493 CHID 0000 VPID 044D
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 requested controlword for ecm C95A4DDBC11FB8EBFF5E55167FD80112 on fd 12
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) generic delay: write cw 60 ms after ecmrequest
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 ca0 is using index 0 for streampid 044D -> write even part of cw!
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 writing even part (E5F0A97E7871D5BE) of controlword, replacing expired (902647FDDCA878FC)
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 write cw1 index: 0 (ca0)
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Demuxer 0 ca0 is using index 0 for streampid 0457 -> skip, even part of cw already written!
2024/04/28 21:02:54 0D741FD1 c   (dvbapi) Using 1 of 8 total descramblers
2024/04/28 21:02:54 0D741FD1 c      (ecm) LOCAL (0624&/3C29/0493/0000/59_9D74EDFE57150F7BE5F0A97E7871D5BE HOP:00:0000_0000): found (98 ms) by SLOT - Arena Sport 1 HD (lg)

[Olda]

EnoSat diky za info - klient Amiko po restartu zatím ok.

do teď se to nikdá nestalo!

[9000peter]

OSCam 2.24.04-11778-801 samur

Kód: Vybrat vše

Unix starttime: 1714551110
Starttime:      01.05.2024 10:11:50
Version:        2.24.04-11778-801@cccc22ab
Compiler:       armv7ve_cak7-l2b_(samur)
Box type:       sf4008 (generic)
PID:            3451
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam-emu/
WebifPort:      8888

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
SSL support:                             no
DVB API support:                         yes
DVB API with Stream Relay support:       yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 no
Loadbalancing support:                   yes
Cache exchange support:                  no
CW Cycle Check support:                  no
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            no
ARM NEON (SIMD/MPE) support:             no
Emulator support:                        yes
Built-in SoftCam.Key:                    no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                yes
scam:                                    no
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no
Streamrelay:                             yes

Reader support:                          yes

Nagra:                                   yes
Nagra CAK7 (Merlin/Cameleon/Cayman):     yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                no - no EMM support!
Bulcrypt:                                yes
Griffin:                                 no - no EMM support!
DGCrypt:                                 no - no EMM support!

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

[Romania]

Oscam Skylink M7 L2b
Ahojte zde je k dispozici Skylink Oscam AMR Layer 2 B - funkční i Raspberry pi.
Oscam 11732 rp2-rp1 - nutno ověřit adresář /etc/tuxbox/config/oscam/
OSCam Skylink 11732 pro CoreELEC a Rpi 3
Oscam 11442 L2b - skylink

Lidicky porad to nechapu
mam VU s arm a mam oscama skylink ice vse jede ale prima krimi mi nejde rozjed
muze nekdo poradid. roman.palla@telenet.be. dekuji vsem

[peter54]

Asi by bolo praktické, keby si prešiel na oscam 11750.
Skontroluj, či je stanica správne naladená a či ti naozaj ide všetko, čo máš zaplatené.
Bez logov a bez podrobného popisu, čo si už spravil a čo konkrétne sa deje, to je tak maximum, čo viem poradiť. Napríklad odkedy ti neide prima krimi? Log z oscamu zo štartu karty atd. Idú iné programy s l2b atd. Čím viac info poskytneš, tým lepšia šanca, že ti pomôžeme.

[9000peter]

OSCam 2.24.05-11784-801 samur

Kód: Vybrat vše

Unix starttime: 1716567193
Starttime:      24.05.2024 18:13:13
Version:        2.24.05-11784-801@3fe0194c
Compiler:       armv7ve_cak7-l2b_(samur)
Box type:       sf4008 (generic)
PID:            30800
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam-emu/
WebifPort:      8888

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
SSL support:                             no
DVB API support:                         yes
DVB API with extended CW API support:    yes
DVB API with Stream Relay support:       yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 no
Loadbalancing support:                   yes
Cache exchange support:                  no
CW Cycle Check support:                  no
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            no
ARM NEON (SIMD/MPE) support:             no
Emulator support:                        yes
Built-in SoftCam.Key:                    no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                yes
scam:                                    no
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no
Streamrelay:                             yes

Reader support:                          yes

Nagra:                                   yes
Nagra CAK7 (Merlin/Cameleon/Cayman):     yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                no - no EMM support!
Bulcrypt:                                yes
Griffin:                                 no - no EMM support!
DGCrypt:                                 no - no EMM support!

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

Kód: Vybrat vše

[reader]
label                         = skylink_l2b
protocol                      = internal
device                        = /dev/sci0
caid                          = 0624
#force_irdeto                  = 1 #pre ICE kartu
needsemmfirst                 = 1
detect                        = cd
group                         = 1
blockemm-unknown              = 1
disablecrccws                 = 1

[Maverick]

Ahoj, tak stále běží!!

Snímek obrazovky z 2024-05-26 09-20-14.png

[happy66]

Stáhl jsem si poslední Oscam od Samur, ale nevím, který vybrat na Octagon SF8008. Verzí arm je tam v zipu několik.

[peter54]

Použi pre enigma2 armv7ve-libusb.
Ostatné armv7ve majú podporu pre ďalšie zariadenia, ktoré asi nemáš.
Bude treba pozrieť aj sem

[happy66]

Dík vyzkouším. Právě ty ostatní jsem měl na mysli jestli bych to vůbec využil. Mám pouze jednoho klienta vedle v pokoji nic jiného. Tak vyzkouším ten co jsi psal. To bude zřejmě ten první arm v zipu.

[tomasmasa]

Ahojte, mám Skylink ICE v Iredeto režime na serveri v obývačke. Verzia oscam s podporou L2b 11784-801. Ako to nazdieľam do druhej izby, kde mam druhý enigma2 box, s rovnakým oscamom? Nič iné mi netreba, len som sa v tom pár rokov nehrabal,tak mi veľa veci vyšumelo..

Nemám v tých konfigoch nejaké zbytočnosti,čo tam nemusia byť?

Čo nastaviť na serveri a ako bude vyzerať reader na klientovi? Vďaka.

Server Uclan Ustym 4K (AMR), Klient Dreambox DM 525 (mips)

Config na serveri :

Kód: Vybrat vše

[global]
logfile                       = /tmp/oscam-emu.log
nice                          = -1
preferlocalcards              = 2
ecmfmt                        = P: c:p:s:d:i #ECM_L:l #CW=w HOP:j
disablecrccws                 = 1

[cache]

[cs378x]
port                          = 13001
suppresscmd08                 = 1

[newcamd]
port                          = 12121@0000:000000
key                           = 0102030405060708091011121314
mgclient                      = 1

[cccam]
port                          = 12000
nodeid                        = 24D5EF28108C14E0
version                       = 2.3.0
reshare                       = 0

[streamrelay]
stream_client_source_host     = 1
stream_relay_enabled          = 1
stream_relay_buffer_time      = 2000
stream_emm_enabled            = 1
stream_relay_ctab             = 09C4,098C,098D

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
delayer                       = 60
user                          = dvbapiau
read_sdt                      = 1
write_sdt_prov                = 1
extended_cw_api               = 1
demuxer_fix                   = 1
boxtype                       = dreambox

[webif]
httpport                      = 8888
httprefresh                   = 10
httpallowed                   = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

Kód: Vybrat vše

[reader]
label                         = skylink_ICE
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
caid                          = 0624
boxkey                        = 6C37150092C62A96
rsakey                        = 1B4368AD00D5AE23977576FCB202D84897994B358F006B42CB4BCC2301D1FAE2BCF4C397ED4DC7DE6DCE4A1A3D88682DB672827831FA8E6B6E29E7AD37D0A21F
force_irdeto                  = 1
needsemmfirst                 = 1
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
group                         = 1
emmcache                      = 0,2,15,0
blockemm-unknown              = 1
disablecrccws                 = 1

[slax78]

jednoduche.
Do DM525 v oscam.server zadaj ak chces pouzivat

newcamd klienta:

Kód: Vybrat vše

[reader]
label                         = line_newcamd
enable                        = 1
protocol                      = newcamd
device                        = ip Uclean,12121
key                           = 0102030405060708091011121314
user                          = obyvacka
password                      = obyvacka
disableserverfilter           = 1
connectoninit                 = 1
fallback                      = 1
caid                          = 0624
group                         = 1

pre cccam klienta:

Kód: Vybrat vše

[reader]
label                         = CCCam
enable                        = 1
protocol                      = cccam
device                        = ip Uclean,12000
user                          = obyvacka
password                      = obyvacka
inactivitytimeout             = 30
fallback                      = 1
caid                          = 0624
group                         = 1
cccversion                    = 2.3.0
ccckeepalive                  = 1

na servery Uclean si este do oscam.user nastav:

Kód: Vybrat vše

[account]
user                          = obyvacka
pwd                           = obyvacka
uniq                          = 2
au                            = 1
group                         = 1,2,3,4,5,6,7,8,9,10

a do oscam.config doporucujem:

Kód: Vybrat vše

[newcamd]
port                          = 12121@0624:000000,000004,000008

a aby to bolu uplne cukrikove,tak ako do Uclean tak aj do DM525 dopln do suboru oscam.dvbapi:

Kód: Vybrat vše

P: 0624		        	        

[EnoSat]

Server Uclan Ustym 4K (AMR), Klient Dreambox DM 525 (mips)
Config na serveri :

ked zadas boxkey a rsakey oscam sa prepne do static mode (cize L2B rezim je nefunkcny)

[tomasmasa]

Takže mám tie dva riadky (BOX,RSA) vymazať? Myslím že mi to bez toho karta nefungovala,tak som skúšal rôzne "readre" z fóra a až toto nabehlo.. Zajtra vyskúšam a dám vedieť.

[tomasmasa]

Enosat - vďaka, vymazal som s readeru tie dva riadky boxkey a rsakey a funguje to.
Slax 78 - ďakujem za nakopnutie, úplne zabudol som že treba zadefinovať to oscam.user. Cez cccam mi to ale vôbec nefungovalo, klient sa síce pripojil, ale nemal vôbec žiadne dáta. Neviem kde môže byť chyba. Cez newcamd to nabehlo okamžite.

[Orimko]

Ahojte.
Viete mi niekto poradit ako dostanem tento oscam do mojho Pulse 4K? S ipk si viem poradit ale toto nezvladam. Prepacte za blbu otazku ale ucim sa. Dakujem.

[peter54]

V tomto vlákne sa to už riešilo. Stačí si prečítať napríklad
tuto a bude tu toho viac.
Sú tu aj odpovede na ďaľšie otázky, ktoré by si mohol mať, tak najprv čítaj, až potom sa pýtaj.

[happy66]

Tak jsem zprovoznil poslední Oscam Samur 11784-801 a funguje to s tímto readerem bez boxkey i bez rsakey.

Kód: Vybrat vše

[reader]
label = skylink_l2b
protocol = internal
device = /dev/sci0
caid = 0624
force_irdeto = 1
needsemmfirst = 1
detect = cd
group = 1
blockemm-unknown = 1
disablecrccws = 1