Rescue Mode

[EnoSat]

Manualne spustenie Rescue Mode z RS232 konzoly ak system nenacita image
-vypis zariadeni-

Kód: Vybrat vše

BOLT> show devices
Device Name          Description
-------------------  ---------------------------------------------------------
              uart0  16550 DUART at 0xf040a900 channel 0
               mem0  Memory
         emmcflash0  EMMC flash Data : 0x000000000-0x1D2000000 (7456MB)
  emmcflash0.kernel  EMMC flash Data : 0x000100000-0x002000000 (31MB)
  emmcflash0.rootfs  EMMC flash Data : 0x002000000-0x040000000 (992MB)
    emmcflash0.data  EMMC flash Data : 0x040000000-0x1D1FFBE00 (6432MB)
         emmcflash1  EMMC flash Boot1: 0x000000000-0x000400000 (4MB)
         emmcflash2  EMMC flash Boot2: 0x000000000-0x000400000 (4MB)
         emmcflash3  EMMC flash RPMB : 0x000000000-0x000080000 (512KB)
        flash0.bolt  SPI flash @ CS0: 0x00000000-0x00200000 (2048KB)
       flash0.nvram  SPI flash @ CS0: 0x00200000-0x00220000 (128KB)
     flash0.devtree  SPI flash @ CS0: 0x00220000-0x00240000 (128KB)
    flash0.recovery  SPI flash @ CS0: 0x00240000-0x01000000 (14MB)
             flash0  SPI flash @ CS0: 0x00000000-0x02000000 (32MB)
               eth0  GENET Internal Ethernet at 0xf0b00000
              mdio0  GENET MDIO at 0xf0b00800
              sata0  SATA3 AHCI Device
*** command status = 0
BOLT>

-manualne spustenie Recovery Mode-

Kód: Vybrat vše

boot flash0.recovery:

Manualne spustenie zo slotu v pameti

Kód: Vybrat vše

boot -raw -zimg emmcflash0.kernel: options="root=/dev/mmcblk0p2 rootwait rootfstype=ext4"

alebo z ineho slotu

Kód: Vybrat vše

boot -raw -zimg emmcflash0.kernel: options="root=/dev/mmcblk0p3 rootwait rootfstype=ext4"