Phoenix Prolific PL2303

[Olda]

Dobrý den, prosím o radu pořídil jsem tuto čtečku Phoenix Prolific PL2303 a nemjde mi rozchodit .

čtečka.jpeg

Oscam čtečku najde i kartu ale když ji má načíst tak se zastaví a nic. Zkoušeno Ubuntu 64 i RP 3 .

Děkuji .

[peter54]

Do mhz aj do cardmhz daj 357 a musí ísť. Ak predsa nie, musíš dať reader z oscamu a log zo štartu čítačky.

Kód: Vybrat vše

[reader]
label                         = ANTIK
description                   = /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
enable                        = 0
protocol                      = mouse
device                        = /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
pincode                       = 1234
autospeed                     = 0
caid                          = 0B00
detect                        = none
ident                         = 0B00:000000
group                         = 1,4
emmcache                      = 1,3,2,0
disablecrccws                 = 1

[Olda]

Děkuji ale zatim nic .

Kód: Vybrat vše

2022/07/16 20:30:11 0 s >> OSCam << cardserver started, version SKYLINK, build r10080 (i686-linux-gnu)
2022/07/16 20:30:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3172
2022/07/16 20:30:11 0 s signal handling initialized
2022/07/16 20:30:11 0 s Binary without Conax module - no EMM processing for Conax possible!
2022/07/16 20:30:11 0 s Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2022/07/16 20:30:11 0 s Binary without Seca module - no EMM processing for Seca possible!
2022/07/16 20:30:11 0 s Binary without Viaccess module - no EMM processing for Viaccess possible!
2022/07/16 20:30:11 0 s Binary without NDS Videoguard module - no EMM processing for NDS Videoguard possible!
2022/07/16 20:30:11 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2022/07/16 20:30:11 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2022/07/16 20:30:11 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2022/07/16 20:30:11 0 s Binary without Griffin module - no EMM processing for Griffin possible!
2022/07/16 20:30:11 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2022/07/16 20:30:11 0 s Prolific [mouse] creating thread for device /dev/ttyUSB0
2022/07/16 20:30:11 0 s waiting for local card init
2022/07/16 20:30:11 F7900610 h webif: decompressed 91884 bytes back into 240868 bytes
2022/07/16 20:30:11 F7900610 h HTTP Server running. ip=0.0.0.0 port=8888
2022/07/16 20:30:12 9A44FD0 r Prolific [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2022/07/16 20:30:13 0 s init for all local cards done
2022/07/16 20:30:13 0 s anti cascading disabled
2022/07/16 20:31:02 F7900610 h Prolific [mouse] Restarting reader
2022/07/16 20:31:02 F7900610 h Prolific [mouse] creating thread for device /dev/ttyUSB0
2022/07/16 20:31:02 F7505690 r Prolific [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2022/07/16 20:32:07 F7900610 h Prolific [mouse] Restarting reader
2022/07/16 20:32:07 F7900610 h Prolific [mouse] creating thread for device /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
2022/07/16 20:32:07 F77132E0 r Prolific [mouse] Reader initialized (device=/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0, detect=cd, mhz=357, cardmhz=357)

usb výpis

Bus 004 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
iProduct 2 USB-Serial Controller
iSerial 0

zkoušel jsem i dev/ttyUSB0 je to stejné.

[Olda]

Peter54 - děkuji už jede , sice jenom na MHz 357 když to přepnu na 600 tak oscam spadne ale jsem rád že jede alespon tak.

Kód: Vybrat vše

2022/07/16 21:26:00 0 s Freesat [mouse] creating thread for device /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
2022/07/16 21:26:00 0 s waiting for local card init
2022/07/16 21:26:00 F7A00610 h webif: decompressed 91884 bytes back into 240868 bytes
2022/07/16 21:26:00 F7A00610 h HTTP Server running. ip=0.0.0.0 port=8888
2022/07/16 21:26:00 8FA7FD0 r Freesat [mouse] Reader initialized (device=/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0, detect=none, mhz=357, cardmhz=357)
2022/07/16 21:26:01 8FA7FD0 r Freesat [mouse] card detected
2022/07/16 21:26:02 8FA7FD0 r Freesat [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2022/07/16 21:26:02 8FA7FD0 r Freesat [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2022/07/16 21:26:02 8FA7FD0 r Freesat [mouse] Setting baudrate to 19200 bps
2022/07/16 21:26:02 8FA7FD0 r Freesat [mouse] Calculated work ETU is 52.10 us reader mhz = 357
2022/07/16 21:26:02 8FA7FD0 r Freesat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2022/07/16 21:26:03 8FA7FD0 r Freesat [mouse] Hist. Bytes: TÄ
2022/07/16 21:26:03 8FA7FD0 r Freesat [mouse] Irdeto SC 58 version 21 revision 1, patch level e
2022/07/16 21:26:03 8FA7FD0 r Freesat [mouse] caid: 0653, acs: 0.05, country code: CZE
2022/07/16 21:26:03 8FA7FD0 r Freesat [mouse] providers: 4, ascii serial: 4285334787, hex serial: 19EB45, hex base: 13
2022/07/16 21:26:04 8FA7FD0 r Freesat [mouse] active providers: 4 (19ebff,ffffff,ffffff,ffffff)
2022/07/16 21:26:04 8FA7FD0 r Freesat [mouse] found card system irdeto
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] entitlements for provider: 1, id: 19EBFF
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: 03EA, date: 2013/06/11 - 2013/06/21
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: 03EE, date: 2013/06/11 - 2013/06/21
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: 03F3, date: 2013/06/11 - 2013/06/21
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: 4E32, date: 2013/06/11 - 2013/06/21
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: 7FFE, date: 2013/06/11 - 2013/07/11
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] chid: FFD8, date: 2013/06/11 - 2013/06/21
2022/07/16 21:26:04 8FA7FD0 r Freesat [irdeto] ready for requests
2022/07/16 21:26:05 0 s init for all local cards done
2022/07/16 21:26:05 0 s anti cascading disabled

nastavení čtečky:

Kód: Vybrat vše

[[reader]
label                         = Freesat
description                   = Freesat irdeto
protocol                      = mouse
device                        = /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
caid                          = 0653
boxkey                        = B5996D92AF37323D
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
force_irdeto                  = 1
needsemmfirst                 = 1
detect                        = none
group                         = 1,4
emmcache                      = 1,3,2
disablecrccws                 = 1

/code]

[peter54]

Super.
detect = none je na istotu. Tvoju konkrétnu čítačku nepoznám tak ešte vyskúšaj, či nepôjde s detect = cd alebo detect = !cd

[Olda]

Ok a dík.

Tak
detect = cd - karta nenajede
detect = !cd - karta najede

po změně detect = !cd najede i jako zařízení device= /dev/ttyUSB0

Lze ještě nějak pořešít změnu frekvence čtečka podporuje 3.7 a 6 MHz .

dík

[Olda]

Finální nastavení čtečky:

Kód: Vybrat vše

[reader]
label                         = Freesat
description                   = Freesat irdeto
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0653
boxkey                        = 7971335C1C7F6B94
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
force_irdeto                  = 1
needsemmfirst                 = 1
detect                        = !cd
group                         = 1,4
emmcache                      = 1,3,2
disablecrccws                 = 1

[peter54]

Keď to má prepínátko na 6 mhz, tak prepni prepínač a do mhz daj 600. Musí tak ísť. Cardmhz už nemeň.

[Olda]

To jsem zkoušel už několikrát, po přenastavení přepínače a MHz Oscam hned po local card init spadne .

Kód: Vybrat vše

17:50:11        0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
17:50:11        0 s Freesat [mouse] creating thread for device /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
17:50:11        0 s waiting for local card init
17:50:11 F7A00610 h webif: decompressed 91884 bytes back into 240868 bytes
17:50:11 F7A00610 h HTTP Server running. ip=0.0.0.0 port=8888
ubuntu@ubuntu-System-Product-Name:~$ 

Kód: Vybrat vše

[reader]
label                         = Freesat
description                   = Freesat irdeto
protocol                      = mouse
device                        = /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
autospeed                     = 0
caid                          = 0653
boxkey                        = 988393E91B3794C5
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
force_irdeto                  = 1
needsemmfirst                 = 1
detect                        = !cd
mhz                           = 600
group                         = 1,4
emmcache                      = 1,3,2
disablecrccws                 = 1

[peter54]

Po prestavení prepínača je treba vytiahnuť a zastrčiť usb. Ak to nepomôže, tak sa už len s tým treba zmieriť. Rozhodne by kvôli tomu nemal oscam padať.

[Olda]

peter54 děkuji za snahu , samozřejmě jsem to zkoušel i odpojit od usb i reboot , furt stejný.

Už je to i tak pokrok po roce sem ji alespoň rozjel , celý problem byl - detect = !cd

nikde jsem to tenkrát nenašel ve spojitosti PL2303 .

jen pro info i když změním v funkčním nastavení MHz jen z 357 na 358 tak to taky spadne a až do odpojení čtečky z usb Oscam nenajede.

[peter54]

Detect je záležitosť prevedenia a nie čipu. Ja mám !cd na ftdi čítačke PiSwords. Vlastne ak je to nesprávne, vždy pri vlożení karty to chápe ako vybratie a pri vybratí karty sa snaží kartu čítať. V logu to vidno a vyzerá to ako chaos, kým sa pochopí čo sa deje.

Kód: Vybrat vše

[reader]
label                         = 0624_CZ
protocol                      = mouse
device                        = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL016X0F-if00-port0
autospeed                     = 0
caid                          = 0624
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
force_irdeto                  = 1
dynamic_camkey                = 1
needsemmfirst                 = 1
detect                        = !cd
mhz                           = 1000
group                         = 1
emmcache                      = 0,2,2,0

[Maverick]

čus , jaký je rozdíl v použití device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AL016X0F-if00-port0 nebo device = /dev/ttyUSB0 ?

[peter54]

V podstate žiaden. Pôjde rovnako. Môžeš si vybrať, ako chceš. Funguje to tak na sbc. Sú to armbianom automaticky vytvárané softlinky. Na rozdiel od ttyUSBx sa nemenia a vždy ukazujú na tú istú čítačku.

[Maverick]

nezná někdo příkaz na výpis seznamu čteček format viz příspěvek peter54.

[peter54]

Žiadne tajomstvo. Príkaz ls. Ostatné je omáčka.

[Maverick]

Dík peter54 , pro zjednodušení přikládám tvůj přikaz v kódu:

Kód: Vybrat vše

ls -l /dev/serial/by-*/*|perl -nale 's!^.*/dev/!/dev/!; print'

[peter54]

Aby neboli preklepy, je to takto

Kód: Vybrat vše

root@zero:~/scripts# cat citacky.sh
#!/bin/bash
ls -l /dev/serial/by-*/*|perl -nale 's!^.*/dev/!/dev/!;print'|perl -ple 'BEGIN{print "Zoznam citaciek:"};if (/by-path/) {$a++};END{print "spolu ".$./2}'
#ls -l /dev/serial/by-*/*|perl -nale 's!^.*/dev/!/dev/!;print'
root@zero:~/scripts#

Alebo takto

Kód: Vybrat vše

root@zero:~/scripts# ls -l /dev/serial/by-*/*|sed 's!^.*/dev/!/dev/!;'
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A100N0DB-if00-port0 -> ../../ttyUSB1
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A105BTTA-if00-port0 -> ../../ttyUSB0
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A7031XJZ-if00-port0 -> ../../ttyUSB3
/dev/serial/by-path/platform-sunxi-ohci.2-usb-0:1:1.0-port0 -> ../../ttyUSB0
/dev/serial/by-path/platform-sunxi-ohci.3-usb-0:1:1.0-port0 -> ../../ttyUSB1
/dev/serial/by-path/platform-sunxi-ohci.4-usb-0:1.4:1.0-port0 -> ../../ttyUSB3
root@zero:~/scripts#

Kto to chce spúšťať cez oscam webif, musí v http script vyplniť cestu k scriptom.