OScam iCam

[sky59]

Zázračná binárka od sky59 to nevytrhne. Tu si treba urobiť poriadok so "servrami" a riadne to nastaviť v oscame.

co tam moze mat zle nastavene ked pri povoleni kazdeho samostatne mu to funguje?

[peter54]

Bez logov by to bolo len hádanie.

[sky59]

"peel the onion", skusim inak, ako by si to nastavil aby sa to tak spravalo?

[peter54]

Zatiaľ ani jeden príspevok neposkytol ani konfiguráciu oscamu, ani logy. Tak si lúpaj cibuľu, len ty vieš s istotou, že to tvoja binárka zachráni. K aliexpress servrom sa škoda vyjadrovať.

[raven]

Inak otazocka je moc velky rozdiel medzi pracou oscam Icam s pracou daneho servera odkial taha programy a pracou Iptv servera odkal taha programy v enigme2?

[sky59]

Ak som spravne "dopochopil" tvoju otazku:
- icam taha transport stream zo satelitu teda 100% video/audio dat, zo serveru taha iba kody kazdych 3 sekundy, je to par stoviek bytov
Kedze standardne dvb obvody nedokazu kompletne dekodovat skyde kodovanie tak koumaci vymysleli ze to dekoduje procesor s podporou SIMD instrukcii (NEON pri arm procesoroch) neviem ako to dokazu stihat mips procesory
Kedze sa uz dekodovane video/audio nedokaze napojit na standardnu hw cestu/zbernicu tak sa lokalne spusta lokalny iptv server ktory potom prijimac "prijima"

- iptv externy server vlastne posiela uz to, co sa pri icam ziska po dekodovani procesorom, cize vsetky data idu cez internet, samozrejme je ich "nekonecne" viac s porovnanim kolko reprezentuju kody pri icam

[raven]

No ved prave ze co som poskusal oscam Icam z dobre fungujuceho zdroja tak tie dane programy ako Sky De alebo Sky IT nejdu tak dobre ako z toho isteho servera ked to prepnem na IPTV tak tam to ide omnoho lepsie a aj viac programov.Zrejme potom asi dane oscam icam s tym maju viac problemov ako ked to ide cez IPTV.

[sky59]

Mne ide skyde bez zasklbu zo satelitu

Ak to sledujes cez iptv tak mas asi neobmedzeny internet a dostatocne rychly?
A pri iptv oscam nic nerobi...

A mas SZ

[licnak]

Aby veci fungovali s icam

1. Potrebujete platnú kartu alebo zdieľanie karty pre sly DE, sly UK alebo Sly IT. Ak chcete všetky 3, potrebujete všetky 3 karty .

2. Oscam emu bin s icam patch pre požadované balenie,

Dám tu možno nejaké vzorové nastavenia.
Snáď to niekomu pomôže alebo ho nakopne.
Toto nieje moja parketa. Ale čo sa tomu viac venujete skúste na to pozrieť.

userbouquet.sky-de-it-uk-icam-01-10-23.zip
config.zip

[sky59]

IT a UK pouziva rovnaky system dekodovania ako DE?

[EnoSat]

takmer, skyDE aktivoval novy NDS pre Sky Q

[golkomen07]

Mám oscam icam na sky de a oscam na plustelku, sky de beží ale plustelka nefunguje (mám originál kartu), v oscam- stable plustelka funguje, openatv 7.4, vu+zero4k

[slax78]

Log ?

[golkomen07]

Kód: Vybrat vše

2024/07/25 08:29:24 00000000 s     (main) System name    = Linux
2024/07/25 08:29:24 00000000 s     (main) Host name      = vuzero4k
2024/07/25 08:29:24 00000000 s     (main) Release        = 4.1.20-1.9
2024/07/25 08:29:24 00000000 s     (main) Version        = #1 SMP Mon May 27 05:10:32 UTC 2024
2024/07/25 08:29:24 00000000 s     (main) Machine        = armv7l
2024/07/25 08:29:24 00000000 s     (main) Stb model      = dm8000
2024/07/25 08:29:24 00000000 s     (main) Stb vumodel    = vuzero4k
2024/07/25 08:29:24 00000000 s     (main) Stb boxtype    = vuzero4k
2024/07/25 08:29:24 00000000 s     (main) creating pidfile /tmp/cam.pid with pid 27293
2024/07/25 08:29:24 00000000 s   (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2024/07/25 08:29:24 00000000 s      (emu) OSCam-Emu version 798
2024/07/25 08:29:24 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2024/07/25 08:29:24 00000000 s     (main) signal handling initialized
2024/07/25 08:29:24 00000000 s   (reader) plustelkaD [internal] creating thread for device /dev/sci0
2024/07/25 08:29:24 00000000 s   (reader) srv200.org_8323875630 [cccam] creating thread for device srv200.org
2024/07/25 08:29:24 00000000 s   (reader) serv19.net_8323875630 [cccam] creating thread for device serv19.net
2024/07/25 08:29:24 00000000 s   (reader) emulator [emu] creating thread for device emulator
2024/07/25 08:29:24 00000000 s     (main) waiting for local card init
2024/07/25 08:29:24 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:24 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:24 0776DDB6 r      (emu) Stream key delayer initialized
2024/07/25 08:29:24 0776DDB6 r      (emu) Stream relay server initialized
2024/07/25 08:29:24 0776DDB6 r   (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2024/07/25 08:29:24 62947D95 h    (webif) webif: decompressed 185169 bytes back into 485864 bytes
2024/07/25 08:29:24 62947D95 h    (webif) HTTP Server running. ip=0.0.0.0 port=8080
2024/07/25 08:29:24 00000000        (emu) INFO: FFDecsa parallel mode = 128
2024/07/25 08:29:24 684FD583 p   (reader) serv19.net: resolved ip=185.129.103.22
2024/07/25 08:29:24 684FD583 p   (reader) serv19.net_8323875630 [cccam] connecting to serv19.net:6500
2024/07/25 08:29:24 5926DA79 p   (reader) srv200.org: resolved ip=31.42.177.100
2024/07/25 08:29:24 5926DA79 p   (reader) srv200.org_8323875630 [cccam] connecting to srv200.org:6500
2024/07/25 08:29:24 684FD583 p   (reader) serv19.net_8323875630 [cccam] proxy initialized, server serv19.net:6500
2024/07/25 08:29:24 5926DA79 p   (reader) srv200.org_8323875630 [cccam] proxy initialized, server srv200.org:6500
2024/07/25 08:29:25 0776DDB6 r   (reader) emulator [emu] card detected
2024/07/25 08:29:26 0776DDB6 r   (reader) emulator [emu] found card system emu
2024/07/25 08:29:26 0776DDB6 r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2024/07/25 08:29:26 0776DDB6 r      (emu) Key file not found in: /etc/tuxbox/config
2024/07/25 08:29:26 0776DDB6 r      (emu) Key file not found in: /var/keys
2024/07/25 08:29:26 0776DDB6 r      (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2024/07/25 08:29:26 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:26 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:28 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:28 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:30 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:30 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:32 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:32 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:34 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:34 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:36 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:36 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:38 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:38 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:40 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:40 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:42 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:42 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:44 6179405C r   (reader) plustelkaD [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2024/07/25 08:29:44 6179405C r   (reader) plustelkaD [internal] Cannot open device: /dev/sci0
2024/07/25 08:29:44 6179405C r   (reader) plustelkaD [internal] Deactivating card
2024/07/25 08:29:44 6179405C r   (reader) plustelkaD [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
2024/07/25 08:29:44 00000000 s     (main) init for all local cards done
2024/07/25 08:29:44 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2024/07/25 08:29:44 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2024/07/25 08:29:44 00000000 s (anticasc) anti cascading disabled
2024/07/25 08:29:44 00000000 s     (gbox) local gbox failed init
2024/07/25 08:29:44 1D5EF9D3 c   (client) plain dvbapi-client granted (dvbapiau, au=auto (4 reader))
2024/07/25 08:29:44 1D5EF9D3 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2024/07/25 08:29:44 1D5EF9D3 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2024/07/25 08:29:44 1D5EF9D3 c   (dvbapi) Detected /dev/dvb/adapter1/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2024/07/25 08:29:44 1D5EF9D3 c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2024/07/25 08:29:45 1D5EF9D3 c   (dvbapi) Demuxer 0 found 0 ECM pids and 7 STREAM pids in CA PMT
2024/07/25 08:30:32 1D5EF9D3 c   (dvbapi) Demuxer 0 stopped descrambling for program 0001 (FFFE@FFFFFE:0001 unknown)
2024/07/25 08:30:32 00000000        (emu) Stream client 0 connected
2024/07/25 08:30:32 00000000        (emu) Stream client 0 request /1:0:19:6E:D:85:C00000:0:0:0:
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1A0E PROVID: 000000 
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B0E PROVID: 000000 
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C0E PROVID: 000000 
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 09F0 ECM_PID: 1F0E PROVID: 000000 
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 found 4 ECM pids and 3 STREAM pids in CA PMT
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 2 
2024/07/25 08:30:33 1D5EF9D3 c   (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF
2024/07/25 08:30:34 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:971DA5FCF64DD39C85D94AD37CAEE420:0000000000000000483644659B310633): found (65 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:30:35 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:DAF6CA55CD2CDF25F66CDCCC630DDF1E:EF7464731D0532070000000000000000): found (324 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:30:42 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:7EFA4B5271D0E2C50A427997E31205EF:00000000000000004891AC61D07B8E28): found (319 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:30:49 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:E345695B63D6FC92B406CD191BD3CC14:AB506833D50B36660000000000000000): found (347 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:30:56 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:B7BE20D813F9F0A8F27D1064609FFAAB:0000000000000000ACBA561FC572622A): found (324 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:31:03 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:4C725C3510D90B9243A6C7F14AF8737C:24E0993A43DB20760000000000000000): found (330 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:31:10 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:CD8867ADB1BE0A11A45192D4C8709181:0000000000000000C40EEB5FA5188D21): found (324 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:31:17 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:3AD6731FA44ED3DEDE089E9A50B97AB2:8AB291609ECC44330000000000000000): found (327 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:31:24 00000000        (emu) Stream client 0 disconnected
2024/07/25 08:31:24 1D5EF9D3 c   (dvbapi) Demuxer 0 stopped descrambling for program 006E (098D@000000:006E unknown)
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0668 ECM_PID: 101B PROVID: 000000 
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 069A ECM_PID: 1025 PROVID: 000000 
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 4AEA ECM_PID: 102F PROVID: 000000 
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 1EC0 ECM_PID: 1039 PROVID: 000000 
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 found 4 ECM pids and 4 STREAM pids in CA PMT
2024/07/25 08:31:25 1D5EF9D3 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2024/07/25 08:31:29 1D5EF9D3 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2024/07/25 08:32:23 1D5EF9D3 c        (-) -- Skipped 10 duplicated log lines --
2024/07/25 08:32:23 1D5EF9D3 c   (dvbapi) Demuxer 0 stopped descrambling for program 0FA3 (0668@000000:0FA3 unknown)
2024/07/25 08:32:23 00000000        (emu) Stream client 0 connected
2024/07/25 08:32:23 00000000        (emu) Stream client 0 request /1:0:19:6E:D:85:C00000:0:0:0:
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1A0E PROVID: 000000 
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B0E PROVID: 000000 
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C0E PROVID: 000000 
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 09F0 ECM_PID: 1F0E PROVID: 000000 
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 found 4 ECM pids and 3 STREAM pids in CA PMT
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 2 
2024/07/25 08:32:24 1D5EF9D3 c   (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF
2024/07/25 08:32:24 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:BB7699AEA45C86C4520F33711FDD25AA:00000000000000002B8120061B6AFA0A): found (64 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:32:27 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:C3FB1983CFCEEBDBB71A37266B62F0F4:C675D83B95E675770000000000000000): found (320 ms) by serv19.net_8323875630 (P/2/2/2)
2024/07/25 08:32:34 1D5EF9D3 c      (ecm) dvbapiau (098D&000000/0BBD/006E/B7:EEA44DB2AE74E2FCF45C3A1D0E8739E1:000000000000000060A3FA3A65B3BC05): found (325 ms) by serv19.net_8323875630 (P/2/2/2)

[golkomen07]

verzia oscamu: Oscam iCam v9 WebInterface r11716-798, nastavenie plustelky, to mám prvé potom mám cccam skD, ten funguje, ked dám oscam - stable tak plustelka funguje

Kód: Vybrat vše

[reader]
label                         = plustelkaD
protocol                      = internal
device                        = /dev/sci0
autospeed                     = 0
caid                          = 0668
boxkey                        = B1B2B3B4B5B6B7B8
rsakey                        = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
needsemmfirst                 = 1
detect                        = cd
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 0,1,15,0

[sky59]

a mas tam vobec /dev/sci0 ? vidis ze ho nemoze "otvorit"

pripoj si terminal a pozri sa ci v /dev vobec mas nieco ako sci0

[EnoSat]

ved ti hore pisal ze ma spustene dva oscamy, preto "busy"

[sky59]

ved ti hore pisal ze ma spustene dva oscamy, preto "busy"

on mi nic nepisal

[EnoSat]

on mi nic nepisal

staci citat, ked uz chces na nieco reagovat

Mám oscam icam na sky de a oscam na plustelku

[golkomen07]

Mám nainštalovaný iba Oscam iCam v9 WebInterface r11716-798, 2 linky cccam na SkyD, Skylink a plustelku kartu (originál), cccam idú, plustelka nie, keď nainstalujem oscam-stable nastavím to ako u toho oscam icam , funguje plustelka, cccam skylink (SkyD nejde - funguje iba s tým oscam iCam v9, preto to chcem vsetko do jedného)